Leka Roof

Leka Roof Cost? Fill Out The Form

Leka Roof Outer Finish

The outer tile finish of the Leka System is offered with ‘either’
a) A Tapco tile finish, made of a blend of plastics and imported from America. This tile has been tested over many years and offers a 40 year warranty that protects against cracking, warping and from the tile losing its unique/authentic colour. A genuine lightweight slate alternative. Comes with a variety of colour finishes
b) A metrotile finish, made as an offering that contains Aluzinc, steel and natural stone chip granules (to name a few) this tile replicates concrete tiling and also comes with a 40 year warranty and comes with a variety of colour finishes.

Leka Roof External Board

This covering board is truly unique in every way and offers the following benefits:
a) Two sides of high grade pvc with one being thicker in depth than the other. This offers strength up to a meter wide span under loads of 29 stones point load centre without breaking. Also offering 100% water proof technology and no need for felting.
b) The ability to retain our screws thread at either side and provides significant strength in holding tiles to the leka external boards under wind loads and force.
c) The centre foam core is made up of XPS closed cell formula. The term ‘Closed cell’ simply means that the system has an impermeable barrier against water/moisture and does not absorb either. The XPS is not only water tight but offers a thermal efficiency level or ‘r Value that aids the Leka System in achieving its U Values of 0.15. Each screw binds around the XPS centre foam core, dis-allowing water transfer around the thread of the screw.
d) Above all the Leka external board is 1/3 the weight of a standard marine plywood sheet.

Leka Roof External Tape

The external jointing tape provides the ultimate weather barrier and has the following benefits:
a) This tape, imported from America, works and thoroughly performs in temperatures from -40c up to 149c
b) This tape has slight expansion capabilities when movement in the roof system occurs.
c) When trying to rip/tear the tape this is very difficult and virtually impossible under human strength but can be scored and teared for applying purposes with a sharp knife

Leka Roof Celotex Insulation

Leka only uses the very best insulation and prides itself on using the best core components. The 130mm depth of the Celotex has the following benefits:
a) A better ‘r Value’ helping achieve a better energy value to the overall Leka System
b) In our opinion, a stronger brand
c) BBA approval

Leka Roof Insulation Tape

Foiled insulation tape provides a vapour barrier between the external boards and the underside of the insulation, this is applied between the celotex and the GRP roof rafters.

Leka Roof Internal Board

a) A third the weight of an equivalent depth traditional plasterboard
b) Thermally efficient, containing ‘r Values’ to aid towards the Leka systems overall U Value
c) 100% impermeable against water and moisture absorption
d) Can be spanned up to 1m wide due to the patented finish of the board.
e) Treated exactly like plasterboard, thus needing to be primed with PVA or equivalent, and scrim tape applied before plastering.
f) Internal board cut sheets are supplied with every job to allow simply cutting of boards on floor before offering up to ceiling.

Leka Roof GRP Roof Structure

The GRP structure is the most innovative offering in the conservatory roof market to date and is the only one of its kind in the UK. The benefits are as follows:
a) A higher tensile strength than steel. This means in basic form that steel will fail/buckle before GRP will
b) Extremely lightweight alternative to steel, timber, aluminium
Share by: